Q1: Is there an ON/OFF switch?

A1: NO, there is no ON/OFF, the light is entirely triggered by NFC signal from the phone.

Q2: Is Battery required?

A2: Yes. Please change 9V battery behind when you feel the LEDs are too dim. The battery life depends on how frequent this standee being tapped.

Q3: How it works?

STEP 1: Make sure you have a android NFC phone (with NFC turned ON, check setting if you are not sure)

STEP 2: Make sure your phone is unlocked

STEP 3: Tap the phone (back of the phone) on the “tap here” of the standee.

Q4: Where should I tap on, exactly? Where is the NFC tag?

A4: There is a NFC tag on the PVC light film. You can reposition the NFC tag. This is the NFC tag where store the URL.

See video for the guide.

Video 1 : https://www.youtube.com/watch?v=Ld8bsNMkr_0

Video 2: https://www.youtube.com/watch?v=l0ym8N_E6Cw

Q5: Why I found it hard to tap?

A5: In fact, NFC phones are not all identical, the position of the NFC antenna (detection area) are NOT all the same for every phone model (even they are the same brand).

Q6: IF I want to change the NFC content, what should I do?

A6:Use NXP tag writer app to rewrite and protect the content. See link.

Q7: Where is the area to trigger LED?

A7: The box behind the light box has a antenna to sense the NFC signal from android NFC smartphone.